PRODUCTS
MDtest - new professional ESC testers
Features:
- The MDtest instrument is designed to verify the safety of electrical appliances and medical devices in general.
- All AC measurements are measured by the method TRMS (true rms), and for some measurements the DC component value can be displayed.
- The MDtest meets the requirements of EN 62353 and EN 60601 (partially), including the required input charakteristics.
- Some leakage current measuremets shall be done at the SFC (Single Fault Condition) - the Neutral or PE conductor is interrupted.
- Measurement of PE current during operation and differential leakage current of three-phase portable appliance by means of optional adapters.
- Some measurements are also possible if the MDtest is connected to the IT mains.
- Test results can be saved under an ID number which is unequivocally assigned to the respective DUT.
- The test structures created at the PC can be loaded onto the MDtest.
- Measurement data saved to the test instrument can be imported to ILLKO Studio software via the USB port and reports can be generated.
- Create user - defined test sequences.
- Power supply systems: 230 V / 50 Hz
more..
REVEXmax S and REVEXmax W - new professional PAT testers
Features:
- The REVEXmax instrument is designed to verify the safety of electrical appliances in general.
- All AC measurements are measured by the method TRMS (true rms).
- Measured circuits meet the requirements of EN 61557 and EN 60974-4 (requirements for measuring circuits),
including the required input characteristics.
The REVEXmax performs the following tests:
- Earth bond test >1 A AC
- Insulation resistance test 500 V DC and 250 V DC
- Alternative (substitute) leakage current
- PE current during operation and touch leakage current
- Differential leakage current and touch leakage current
- Apparent power
- Mains voltage
- Current consumption
- Welding equipments output voltage and leakage current (W variant only)
- External voltage (W variant only)
more..
REVEXplus and REVEXplus USB - professional PAT testers
Features:
- Insulation resistance (nominal voltage 500 V)
- Continuity (short-circuit current > 200 mA); resolution 0.001 Ω
- Substitute leak. current, differential leakage current, PE current during operation; resolution 0.001 mA
- Touch leakage current; resolution 0.001 mA
- Power consumption, current and cosφ of tested appliance
- Power consumption, current and cosφ of tested appliance by means of optional clamp
- Tested equipment current by means of optional clamp
- PE current during operation and differential leakage current by means of optional clamp
- PE current during operation and differential leakage current of three-phase portable appliances
- Mains voltage
- USB port allows online transfer of measured results to PC (REVEXplus USB)
- Power supply systems: 230 V / 50 Hz ÷ 60 Hz or 100 V ÷ 140 V / 50 Hz, 60 Hz
more..
PL 2051 - adapter for measurement of medical instruments
Features:
- PL 2051 is adapter, which in conjunction with REVEXplus (USB) enables measuring of medical instruments leakage current.
more..
DIGIOHMpro - 200 mA DC continuity tester
Feature:
- 200 mA continuity test current
- resistance up to 200 Ω
- DC voltage up to 650 V
- AC voltage up to 470 V
- single-pole phase test
- phase rotation test
- torch light
more..
Features:
- Testing of standard and selective, AC and A type RCD, IΔN = 10, 30, 100, 300, 500 mA
- Measurement of contact voltage, trip out time (1/2, 1, 2, 5 xIΔN), tripping current
- AC TRMS voltage 190,0 ÷ 260,0 V
- Phase (live) conductor test
- The bright multicolour OLED display
- Patent-protected storage of the test tips in transport position – sharp tips are safely hidden
- The bright LED near the test tip allows you to illuminate the measured area
- The instrument is powered by four AAA rechargeable NiMH/NiCd batteries that can be charged inside the instrument
more..
GIGATESTpro - Insulation Resistance / Surge Protection Devices Tester
Features:
- Insulation resistance up to 9,999 GΩ, test voltage 50 ÷ 1000 V DC
- Surge Protection Devices: voltage ramp 40 ÷ 1050 V DC, threshold current 1 mA
- DC / AC TRMS voltage 0 ÷ 600 V
- The database of surge protection devices in the instrument’s memory allows easy evaluation of measurements
- The bright multicolour OLED display
- Patent-protected storage of the test tips in transport position – sharp tips are safely hidden
- The bright LED near the test tip allows you to illuminate the measured area
- The instrument is powered by four AAA rechargeable NiMH/NiCd batteries that can be charged inside the instrument
more..
ZEROTESTpro - Loop/Line Tester
Features:
- Fault Loop and Line resistance and prospective fault current
- Fault Loop resistance and prospective fault current (no-trip of a RCD)
- The database (table) of fuses’ types/disconnecting times/rated currents in the memory of the ZEROTESTpro enables to evaluate automatically the measurements results
- AC TRMS voltage 24,0 ÷ 260,0 V
- Phase (live) conductor test
- The bright multicolour OLED display
- Patent-protected storage of the test tips in transport position – sharp tips are safely hidden
- The bright LED near the test tip allows you to illuminate the measured area
- The instrument is powered by four AAA rechargeable NiMH/NiCd batteries that can be charged inside the instrument
more..
ALF 10 - 10 A AC earth bond resistance and voltage drop meter
Features:
- Earth bond voltage drop at 10 A AC (EN 60204-1)
- Earth bond resistance at 10 A AC
- Earth bond resistance of appliances (EN 60364)
- Adjustable wire cross-section (EN 60204-1)
more..
ZEROLINE 60 - high precision fault loop impedance and line impedance measurement
Features:
- Fault loop impedance, resolution 0,001 Ω
- Line impedance, resolution 0,001 Ω
- Fault loop resistance, no trip-out of RCD in RCD protected installation
- Max. value of Z / R - value which takes into consideration operating error of the ZEROLINE 60
- Prospective short-circuit current
- Earth resistance (substitute method)
- AC voltage and frequency
more..
Discontinued products